GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Engine 🢒 Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L 🢒 Cylinder Head Removal - Left Side

    Object Number: 2041098 Size: SH

    Note: The cylinder head bolts are torque to yield bolts and are single use only fasteners.

  1. Remove and discard the cylinder head bolts (1) 10 places and (2) 5 places.

    2. Discard the bolts.

    Caution: After removal, place the cylinder head on 2 wood blocks in order to prevent damage to the sealing surfaces.

  2. Remove the cylinder head (3).

    3. Object Number: 2041096 Size: SH

    Note: Cylinder head gaskets must be discarded whenever the cylinder head has been removed from the cylinder block.

  3. Remove the cylinder head gasket (1).

    4. Discard the gasket.

  4. Clean and inspect the cylinder head and the cylinder block sealing surfaces. Refer to Cylinder Head Cleaning and Inspection and Engine Block Cleaning and Inspection.
  5. If necessary, disassemble the cylinder head. Refer to Cylinder Head Disassemble.