Note: The valve rocker arm cover gasket is a single use only component and must be replaced whenever the valve rocker arm cover is removed from the cylinder head.
Discard the valve rocker arm cover gasket (1).
Note: Do not remove the oil fill tube from the cover, unless service is required. If the oil fill tube has been removed from the cover, install a NEW tube during assembly.
Discard the oil fill tube (2).
Note:
• All gasket surfaces should be free of oil and other foreign material during assembly. • DO NOT reuse the valve rocker arm cover gasket. • The valve rocker arm cover bolt grommets may be reused.
Caution: Refer to Fastener Caution in the Preface section.