For vehicles with the Antilock Brake System (ABS), this light will come on briefly, as a check, when you start your vehicle.
If it does not, have your vehicle serviced so that the light works properly when it needs to.
If the light and a message in the DIC stays on longer than a few seconds after you start your engine, or comes on and stays on while you are driving, try resetting the system. To reset the system:
- If you are driving, pull over when it is safe to do so.
- Place the vehicle in P (Park).
- Turn off the ignition.
- Then restart the engine.
If the light remains on after resetting the system or comes on again while driving, your vehicle needs service. If the ABS light is on, but the regular brake system warning light is not on, the antilock brakes are not working properly, but the regular brakes are still functioning. Have your vehicle serviced right away. If both brake lights are on, you do not have antilock brakes, and there's a problem with your regular brakes as well. Have your vehicle towed for service. See Towing Your Vehicle.
The ABS Fault message will remain until (Trip/Fuel) or (Enter) are pressed, but the warning light will remain until the problem is fixed. See DIC Warnings and Messages for more information.
