GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2008
🢒
G8
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 HVAC Control Module Replacement
Removal Procedure
Remove the glove box assembly. Refer to
Instrument Panel Storage Compartment Replacement
.
Remove the close out panel. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
Remove the right side floor air outlet duct. Refer to
Floor Air Outlet Duct Replacement - Right Side
.
Remove the right hand hinge panel. Refer to
Body Hinge Pillar Trim Panel Replacement
If required, remove the transmission control module. Refer to
Transmission Control Replacement
.
Disconnect the HVAC control module electrical connectors (1).
Remove the HVAC control module to HVAC module assembly retaining screws (1).
Remove the HVAC control module (2) from the HVAC module assembly (3).
Installation Procedure
Install the HVAC control module (2) to the HVAC module assembly (3).
Install the HVAC control module to HVAC module assembly retaining screws (1).
Tighten
Tighten the screws to 2 N·m (18 lb in).
Connect the HVAC control module electrical connectors (1).
If required, install the transmission control module. Refer to
Transmission Control Replacement
.
Install the right hand hinge panel. Refer to
Body Hinge Pillar Trim Panel Replacement
.
Install the right side floor air outlet duct. Refer to
Floor Air Outlet Duct Replacement - Right Side
.
Install the close out panel. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
.
Install the glove box assembly. Refer to
Instrument Panel Storage Compartment Replacement
.