For 1990-2009 cars only
Removal Procedure
- Remove the sunroof module from the vehicle. Refer to Sunroof Frame Replacement.
- Remove the sunroof motor. Refer to Sunroof Motor/Actuator Replacement.
- Remove the rivets from the sunroof cable drive tube retainers which secure the drive tube to the sunroof window track assembly. The 2 rivets are situated on each side.
- Pull the cable drive tube straight out from the track assembly, allowing the cables to release freely from the tubes.
Installation Procedure
- Position the sunroof drive cables into the openings of the metal tubes on each side of the sunroof cable drive tube.
- Feed the sunroof drive cables through the drive tubes.
- Install the sunroof cable drive tube retainers into the ends of the sunroof window track assembly. Ensure that the retainers are fully seated in the track assembly.
- From the top side of the module, install the rivets which secure the drive tube retainers to the window track assembly. Install 2 rivets on each side.
- Install the sunroof motor. Refer to Sunroof Motor/Actuator Replacement.
- Install the sunroof module. Refer to Sunroof Frame Replacement.
- Initialize the sunroof motor. Refer to Sunroof Motor/Actuator Initialization/Teach Process.
- Inspect the sunroof for proper operation.
Note: Do NOT kink the cables.
