Preliminary Procedures

Place the folding top into service position. Refer to Folding Top Retainer Strap Installation Position.

1

Roof Retract Flipper Door Cable Assembly

Tip
Support the front outer closeout panels, as they may rotate without the cable attached.

2

Roof Retract Flipper Door Cable Clip (Qty: 2)

3

Front Folding Top Storage Compartment Closeout Panel Retainer Pin (Qty: 1)

4

Front Folding Top Storage Compartment Closeout Panel Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

5

Front Folding Top Storage Compartment Closeout Panel Assembly

Tip

1. If replacing the panel assembly, transfer all necessary components as needed.
2. Cycle folding top a few seconds at a time to ensure that the tonneau is moving properly and not hanging up or interfering with the top.