Digital Radio Antenna Replacement. Pontiac G6 2008

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2008 🢒 G6 🢒 Driver Information and Entertainment 🢒 Cellular, Entertainment, and Navigation 🢒 Digital Radio Antenna Replacement

Digital Radio Antenna Replacement Coupe andSedan

Callout	Component Name
Preliminary Procedure Lower the headliner trim panel to access the antenna base fastener. Refer to Headlining Trim Panel Replacement.
1	Digital Radio and Mobile Telephone and Vehicle Location Base Assembly Notice: Refer to Fastener Notice in the Preface section. Procedure Loosen the integral nut. Disconnect the electrical connections. Disconnect the antenna cables. Feed the wiring and cable up through the hole in the roof panel. Tighten 10 N·m (89 lb in)

Callout

Component Name

Lower the headliner trim panel to access the antenna base fastener. Refer to Headlining Trim Panel Replacement.

Digital Radio and Mobile Telephone and Vehicle Location Base Assembly

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

Callout	Component Name
Preliminary Procedure Remove the rear compartment lid trim.. Refer to Rear Compartment Lid Inner Panel Trim Replacement.
1	Digital Radio and Mobile Telephone and Vehicle Location Base Assembly Notice: Refer to Fastener Notice in the Preface section. Procedure Loosen the integral nut. Disconnect the electrical connections. Disconnect the antenna cables. Feed the wiring and cable up through the hole in the roof panel. Tighten 10 N·m (89 lb in)

Callout

Component Name

Digital Radio and Mobile Telephone and Vehicle Location Base Assembly

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)