GM Service Manual Online
For 1990-2009 cars only

    Object Number: 1586025  Size: SH

    Important: 

       • It is not necessary to check the fluid level unless the fluid has been changed or a leak is suspected.
       • Inspect the fluid level only when the engine is OFF. Ensure the vehicle is level. The transaxle must be cold.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the fluid level check plug (1).
  3. Verify that the fluid is level with the opening.
  4. If the transaxle is not properly filled, carefully add GM P/N 21018899 manual transmission fluid until it begins to flow out of the fill/check plug.
  5. Notice: Refer to Fastener Notice in the Preface section.

  6. Install the fluid level check plug (1).
  7. Tighten
    Tighten the fluid level check plug to 25 N·m (18 lb ft).

  8. Lower the vehicle.