GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Solvent Level Switch Replacement

Removal Procedure
  1. Drain the washer solvent from the washer solvent container.
  2. Remove the left front fender liner. Refer to Front Fender Liner Replacement .

    3. Object Number: 1207514 Size: SH
  3. Disconnect the washer solvent container level sensor electrical connector.
  4. Using a small flat-bladed tool, remove the washer solvent level sensor (4) from the washer solvent container (1).
  5. Using a small flat-bladed tool, remove the level sensor seal (3) from the washer solvent container (1).

Installation Procedure

    Object Number: 1207514 Size: SH
  1. Position the level sensor seal (3) to the washer solvent container (1), pressing in until fully seated.
  2. Position the washer solvent level sensor (4) to the washer solvent container (1), pressing in until fully seated.
  3. Connect the washer solvent level sensor electrical connector.
  4. Install the left front fender liner. Refer to Front Fender Liner Replacement .
  5. Fill the washer solvent container with washer solvent .