• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
S19A and S19B are the Rear Compartment Lid Release switches. The folding top control (FTC) module uses these switches to determine whether the dowels located on the front corners of the rear deck lid are present. The switches are closed and pull the signal circuit low when the dowels are present.
The FTC module is being commanded.
An short to ground is detected on the signal circuit of S19A.
The top is disabled.
The fault is no longer present and the top completes one cycle.
• | A weak battery may cause DTC B366C 59 to set. |
• | A short to B+ may damage S19A and S19B. |
Power Folding Top Description and Operation
Test the signal circuit of S19A for a short to voltage. If circuit OK, replace the FTC Module.
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.