SMU - Revised Trim Height Specifications and Wheel Alignment Specifications
| Subject: | Revised Trim Height Specifications and Wheel Alignment Specifications |
| Models: | 2005 Pontiac G6 |
This bulletin is being issued to revise the Trim Height Specifications and the Wheel Alignment Specifications in the Wheel Alignment sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Model | Suspension | Tire Size | Engine | Z | D | J | K |
|---|---|---|---|---|---|---|---|
2ZG69 | FE0 | P 215/60R16 | LX9 | 68 mm (2.70 in) | 171 mm (6.70 in) | 230 mm (9.06 in) | 248 mm (9.76 in) |
2ZH69 | FE2 | P 225/50R17 | LX9 | 58 mm (2.30 in) | 168 mm (6.60 in) | 219 mm (8.62 in) | 242 mm (9.53 in) |
All measurements taken with a full tank of gas. All measurements have a tolerance of +/- 10 mm (0.39 in). | |||||||
Suspension | Camber | Cross Camber (L-R) | Caster | Cross Caster (L-R) | Total Toe | Steering Wheel Angle | Thrust Angle | ||
|---|---|---|---|---|---|---|---|---|---|
Left | Right | Left | Right | ||||||
Front | -0.90° ± 0.75° | -0.70° ± 0.75 | -0.20° ± 0.75° | 3.10° ± 0.75° | 3.10° ± 0.75° | 0.00° ± 0.75° | +0.20° ± 0.20° | 0.00° ± 3.50° | -- |
Rear | -0.80° ± 0.50° | -0.80° ± 0.50° | -- | -- | -- | -- | +0.20° ± 0.20° | -- | 0.00° ± 0.30° |
