For 1990-2009 cars only
SMU - Revised Front Camber and Front Camber Cross Tolerance Specifications
| Subject: | Revised Front Camber and Front Camber Cross Tolerance Specifications |
| Models: | 2005 Pontiac G6 |
This bulletin is being issued to revise the front camber and front camber cross tolerance specifications in the Wheel Alignment sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Suspension | Camber | Camber Cross Tolerance |
|---|---|---|
Front | LH -0.90° ± 0.75° RH -0.70° ± 0.75° | -0.20° ± 0.75° |
