GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 G6 🢒 Brakes 🢒 Antilock Brake System 🢒 Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure

    Object Number: 1234794 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Turn the ignition switch to the OFF position.

    4. Object Number: 1234790 Size: SH
  4. Remove the 3 nuts that attach the BPMV bracket to the left front wheelhouse.

    5. Object Number: 1235535 Size: SH
  5. Remove the 4 insulator bolts that attach the BPMV to the bracket.
  6. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.
  7. Remove the bracket from the vehicle.

Installation Procedure

    Object Number: 1235535 Size: SH
  1. Install the bracket to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 4 insulator bolts.

    3. Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 1234790 Size: SH
  3. Install the 3 nuts that attach the bracket to the left front wheelhouse.

    4. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  4. Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Lower the vehicle.