Windshield Washer Solvent Container Filler Tube Replacement Legacy

1. Remove the washer solvent container cap.
2. Remove the push-in retainer from the upper support.
3. Remove the washer solvent container neck, by pulling and turning the neck to release it from the washer solvent container.

It is not necessary to remove the washer solvent container to remove the neck.

1. Position the seal to washer solvent container , pressing in until fully seated.
2. Position the neck to the washer solvent container, pressing in until fully seated.
3. Install the push-in retainer to the upper support.
4. Install the washer solvent container cap.
5. Fill the washer solvent container with washer solvent.
6. Inspect the washers for proper operation.