Windshield Wiper Motor Replacement Legacy

Tools Required

1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
3. Remove the wiper drive system module. Refer to Windshield Wiper System Module Replacement .



4. Using J 39232 , disconnect the wiper transmission links from the wiper motor crank arm.



5. Remove the wiper motor and the wiper drive system module from the vehicle.



6. Remove the washer and nut from the wiper motor crank arm.
7. Remove the wiper motor crank arm.

1. Install the wiper motor crank arm

Notice: Refer to Fastener Notice in the Preface section.

2. Install the washer and nut to the wiper motor crank arm

Tighten
Tighten the bolts to 4.5 N·m (40 lb in).

3. Position the wiper motor and wiper drive system module to the vehicle.



4. Install the wiper transmission links onto the wiper motor crank arm with the J 39529 .



5. Install the wiper drive system module. Refer to Windshield Wiper System Module Replacement .
6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
7. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .
8. Inspect the washers for proper operation.