GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 G6 🢒 Body 🢒 Doors 🢒 Rear Side Door Window Replacement

Removal Procedure

    Object Number: 1221578 Size: SH
  1. Apply masking tape to the outer applique and frame.
  2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  4. Remove the rear door window inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  5. Raise the window far enough in order to gain access to the nylon peg (1) through a hole in the regulator run channel (2) that attaches the window to the regulator.
  6. Remove the center nylon peg (1) that attaches the window guide channel (3) to the window (4). Use a 1/8 inch drift driver to remove the center peg. Lightly tap the pin out of the center.
  7. Lift and remove the window (1) from the door.

Installation Procedure

    Object Number: 1221926 Size: SH
  1. Insert the spreader plug (2) and spreader pin (1) into the window.
  2. Set the spreader plug projection on each side of the window.
  3. Guide the window into the door (5).
  4. Insert the door window (3) into the lift rail guide slot (4).
  5. Lightly tap the top of the window. Position the window on the lift rail.
  6. Inspect the window for proper operation.
  7. Inspect the window for proper operations.
  8. Remove the masking tape from the outer applique and frame.
  9. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  10. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .