GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G5 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Back Cushion Latch Replacement

Removal Procedure

    Object Number: 1734064 Size: SH
  1. Remove the fastener (1) from the lower lock pillar garnish molding. Sedan shown, coupe similar. Fold the garnish trim away from the latch.

    2. Object Number: 876786 Size: SH
  2. Remove the latch bolts.

    3. Object Number: 876787 Size: SH
  3. Disengage the clip holding the latch release handle to the rear compartment shelf.
  4. Remove the rosebud fastener which retains the latch cable to the rear compartment shelf.

    5. Object Number: 888319 Size: SH
  5. Remove the grommet from the sheet metal.
  6. Pull the latch assembly into the passenger compartment.
  7. Remove the latch assembly from the vehicle.

Installation Procedure

    Object Number: 876786 Size: SH
  1. Install the latch assembly.
  2. Feed the cable and the release handle through the sheet metal to the rear compartment.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the rear seat back latch bolts and tighten to 12 N·m (106 lb in).

    4. Object Number: 888319 Size: SH
  4. Install the grommet.

    5. Object Number: 876787 Size: SH
  5. Install the rosebud fastener to the latch assembly cable.
  6. Install the release handle and engage the handle in the clip.

    7. Object Number: 1734064 Size: SH
  7. Install the lower lock pillar garnish molding fastener (1).