GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2000 🢒 Firefly (Canada) 🢒 Body and Accessories 🢒 Horns 🢒 Horn Replacement

Removal Procedure

    Object Number: 352323 Size: SH
  1. Disconnect the horn electrical connectors (3).
  2. Remove the following components from the vehicle:
    3. • The horn mounting bolt
    • The horn (2)

Installation Procedure

    Object Number: 352323 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the horn (2) to the vehicle. Secure the horn with the mounting bolt.

    2. Tighten
    Tighten the horn mounting bolt to 10 N·m (89 lb in).

  2. Connect the horn electrical connectors (3).