GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Open the rear side door.
  2. Open the rubber cap in order to gain access to the door-jamb switch screw.
  3. Remove the screw that retains the door-jamb switch to the door jamb.
  4. Disconnect the door jamb switch electrical connector.
  5. Remove the door-jamb switch from the vehicle.

Installation Procedure

  1. Connect the door jamb switch electrical connector.
  2. Install the door-jamb switch to the door jamb. Secure the switch with the screw.
  3. Close the rubber cap.
  4. Close the rear side door.