For 1990-2009 cars only
- Start the engine.
- Press the brake pedal (1) several times.
- Hold the brake pedal with approximately 30 kg (66 lbs) of pressure.
- Measure the brake pedal-to-floor clearance. If the clearance is less than 60 mm (2.36 in), perform the following procedures:
| • | Inspect the drum brake linings. Refer to Brake Drum Inspection in Drum Brakes. |
| • | Bleed the brakes. Refer to Hydraulic Brake System Bleeding . |
| • | Inspect the vacuum booster pushrod clevis length. Refer to Power Vacuum Brake Booster Replacement . |
