GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Firebird 🢒 Body and Accessories 🢒 Seats 🢒 Rear Folding Seat Back Latch Striker Replacement

Removal Procedure

    Object Number: 330869 Size: SH
  1. Remove the striker bolt (3) from the wheel house panel.
  2. Remove the washer (1) from the striker bolt (3).
  3. Remove the sleeve (2) from the striker bolt (3).

Installation Procedure

    Object Number: 330869 Size: SH
  1. Install the sleeve (2) over the striker bolt (3).
  2. Install the washer (1) over the striker bolt (3).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the striker bolt (3) to the wheel house panel.

    4. Tighten
    Tighten the bolt to 35 N·m (26 lb ft).