GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Firebird 🢒 Body and Accessories 🢒 Seats 🢒 Power Seat Riser Trim Cover Replacement

Removal Procedure
  1. Place protective tape over nearby trim and paint.
  2. Remove the front bucket power seat. Refer to Front Seat Replacement - Bucket .

    3. Object Number: 330712 Size: SH
  3. Remove the screws (7) from the seat riser trim cover (1), and remove the trim cover from the seat adjuster track.

Installation Procedure

    Object Number: 330712 Size: SH
  1. Install the seat riser trim cover (1) to the driver seat adjuster track.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screw (7) to the seat riser trim cover (1).

    3. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).

  3. Install the front bucket power seat. Refer to Front Seat Replacement - Bucket .
  4. Remove the protective tape over nearby trim and paint.