GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Firebird 🢒 Body and Accessories 🢒 Seats 🢒 Power Seat Switch Replacement

Removal Procedure

    Object Number: 728022 Size: SH
  1. Remove the front bucket seat (1). Refer to Front Seat Replacement - Bucket .
  2. Remove the recliner trim cover (2) from the bucket seat (1).
  3. Disconnect the wire harness from the power seat switch (3).
  4. Remove the screws from the power seat switch (3), and remove the power seat switch from the recliner trim cover (2).

Installation Procedure

    Object Number: 728022 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the power seat switch (3) to the recliner trim cover (2), and install the screws to the power seat switch.

    2. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).

  2. Connect the wire harness to the power seat switch (3).
  3. Install the recliner trim cover (2) to the bucket seat (1) and install the screws.

    4. Tighten
    Tighten the screws to 1.7 N·m (15 lb in).

  4. Install the bucket seat. Refer to Front Seat Replacement - Bucket .