Removal Procedure
- Open the window panel.
- For Chevrolet only, remove the rear end finish panel. Refer to
Rear End Panel Replacement
.
- For Pontiac only, remove the taillamp filler. Refer to
Rear End Panel Replacement
.
- Remove the rivets (4).
- Remove the lock cylinder (3).
Installation Procedure
Important: Position the tan dot on the lock cylinder upward when installing the
lock cylinder.
- Install the lock cylinder (3).
Guide the lock cylinder shaft through the hole in the rear end panel
into the hole in the lock support.
- Align the lock cylinder.
- Install the right rivet (4).
- Install the left rivet (4).
- For Pontiac only, install the tail lamp filler. Refer to
Rear End Panel Replacement
.
- For Chevrolet only, install the rear end finish panel. Refer to
Rear End Panel Replacement
.