Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check? | -- | ||
2 | Does the Content Theft Deterrent alarm mode system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | |
3 | Check for body control module (BCM) diagnostic trouble codes (DTCs). Refer to Diagnostic Trouble Code (DTC) Displaying in Body Control System. Is DTC 25/35 displayed? | -- | ||
4 |
Important: Perform the set up procedure for the body control module. Replace the BCM. Refer to Body Control Module Replacement in Body Control System. Did you complete the replacement? | -- | -- | |
5 | Test for and repair a poor connection at the BCM connector C3 terminal C16. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||
6 | Test for and repair a poor connection at the security LED. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and repair a poor connection? | -- | ||
7 |
Did you complete the repair? | -- | -- | |
8 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
