Removal Procedure
- Remove the instrument
panel (IP) carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges and Console.
- Place the IP carrier face down on a clean work surface.
- Remove the air distributor duct bolts.
- Remove the air distributor from the IP carrier.
Installation Procedure
- Install the air distributor
to the IP carrier.
- Install the air distributor duct bolts.
Tighten
Tighten the air distributor duct bolts to 2.2 N·m (19 lb in).
- Install the IP carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges
and Console.