Step | Action | Value(s) | Yes | No | ||||
|---|---|---|---|---|---|---|---|---|
DEFINITION: A ping, a snap or a clicking noise in the driveline that is usually heard during initial load after the transmission is in gear. | ||||||||
1 | Inspect the rear axle lower control arm for loose bolts/screws. Are there loose bolts/screws in the lower control arm? | -- | ||||||
2 | Tighten the bolts/screws to the specified torque. Refer to Rear Suspension in Suspension. Is there still a ping, a snap or a clicking noise? | -- | System OK | |||||
3 | Inspect the universal joints for the following conditions:
Are any of the universal joints worn or damaged? | -- | ||||||
4 | Replace the worn or damaged universal joint(s). Is there still a ping, a snap or a clicking noise? | -- | System OK | |||||
5 | Inspect the fixed yoke in order to determine if the fixed yoke is loose. Is the fixed yoke loose? | -- | -- | |||||
6 | Tighten the drive pinion gear nut to the specified torque. Refer to Fastener Tightening Specifications . Is there still a ping, a snap or a clicking noise? | -- | -- | System OK | ||||
