Starter Shield Replacement 3.8 L

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the starter motor shield bolts (1 and 3) and nut (2).
3. Remove the starter motor shield from the vehicle.

1. Install the starter motor shield to the vehicle.
2. Install the starter shield nut (2) and bolts (1 and 3).

Tighten

•	Tighten to starter motor shield bolt (1) to 30 N·m (22 lb ft).

•	Tighten the starter motor shield bolt (3) to 10 N·m (89 lb in).

•	Tighten the starter motor shield nut (2) to 10 N·m (89 lb in).

3. Lower the vehicle.

Starter Shield Replacement 5.7 L

1. Remove the starter motor. Refer to Starter Motor Replacement .
2. Unsnap the starter motor shield from the starter solenoid.

1. Snap the starter motor shield to the starter solenoid.
2. Install the starter motor. Refer to Starter Motor Replacement .