GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Bonneville 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Electronic Compass Module Replacement

Removal Procedure

    Object Number: 324799 Size: SH
  1. Open the rear compartment lid.
  2. Remove the push-in fasteners (2) retaining the compass module to the rear shelf in the rear compartment.
  3. Slide the module (1) from the mounting slot.
  4. Disconnect the connector (3).

Installation Procedure

    Object Number: 324799 Size: SH
  1. Connect the connector (3) to the module (1).
  2. Install the module into the mounting slot.
  3. Install the push-in fasteners (2).

    4. Press the push-in fasteners until firmly seated.

  4. Close the rear compartment lid.
  5. Refer to Control Module References for programming and setup information.