GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Bonneville 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Rear Integration Body Control Module Replacement

Removal Procedure
  1. Before replacing the rear integration module (RIM), record the personalization settings to transfer to the new module, if available. Refer to Body Control Module (BCM) Programming/RPO Configuration .
  2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  3. Remove the rear seat belt buckle anchor bolts.
  4. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
  5. Move the rear seat back insulator to the side.

    6. Object Number: 492570 Size: SH
  6. Remove the push pin retainers (1).
  7. Disconnect the electrical connectors (3).
  8. Remove the RIM (2) from the vehicle.

Installation Procedure

    Object Number: 492570 Size: SH
  1. Install the RIM to the vehicle.
  2. Connect the electrical connectors (3).
  3. Fasten the RIM (2) to the vehicle with the push pin retainers (1).
  4. Reposition the rear seat back insulator.
  5. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.
  6. Install the rear seat belt buckle anchor bolts.
  7. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  8. Reprogram the RIM. Refer to Body Control Module (BCM) Programming/RPO Configuration .
  9. Refer to Control Module References for programming and setup information.