GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Bonneville 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Door Control Module Replacement

Removal Procedure

    Object Number: 428695 Size: SH
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .
  2. Disconnect the electrical connectors.
  3. Remove the door control module fasteners.
  4. Remove the door control module.

Installation Procedure

    Object Number: 428695 Size: SH
  1. Install the door control module.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fasteners.

    3. Tighten
    Tighten the fasteners to 7 N·m (62 lb ft).

  3. Install the electrical connectors.
  4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement or Rear Side Door Trim Panel Replacement .
  5. Refer to Control Module References for programming and setup information.