Radiator Inlet Hose Replacement L36

Tools Required

J 38185 Hose Clamp Pliers

1. Drain the engine coolant. Refer to Cooling System Draining and Filling .



2. Using the J 38185 loosen and move the inlet radiator hose clamp at the radiator.
3. Remove the inlet radiator hose from the radiator.
4. Using the J 38185 loosen and move the inlet radiator hose clamp at the engine.
5. Remove the inlet radiator hose from the engine.

1. Install the inlet radiator hose to the engine.
2. Install the inlet radiator hose to the radiator.
3. Using the J 38185 install the inlet radiator hose clamps.
4. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Inlet Hose Replacement LD8

Tools Required

J 38185 Hose Clamp Pliers

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .



2. Position the J 38185 to the clamp in order to remove the inlet radiator hose (2) from the radiator (1).



3. Position the J 38185  (2) to the clamp in order to remove the inlet radiator hose (1) from the engine.
4. Remove the inlet radiator hose from the retainer at the tie bar.



5. Remove the inlet radiator hose from the vehicle.

1. Reposition the hose into the original position.
2. Install the inlet radiator hose to the retainer at the tie bar.



3. Position the J 38185 on the hose clamp and reposition the hose (1) to the engine.



4. Position the J 38185 on the hose clamp and reposition the hose (2) to the radiator.
5. Fill the cooling system. Refer to Cooling System Draining and Filling .