Battery positive voltage (B+) is supplied at all time to the rear fuse block CIGAR/AUX relay coil. Battery positive voltage (B+) is supplied at all time through the rear fuse block CIGAR fuse to the CIGAR/AUX relay switch. The rear integration module (RIM) controls the CIGAR relay by supplying ground to the CIGAR relay control circuit. The RIM will activate the CIGAR relay when the ignition switch is turned to the START, ON, or ACCY position. The RIM will also keep the CIGAR relay active for 10 minutes after the ignition switch is turned from any of the previous positions to the OFF position.

When the CIGAR relay is active, battery positive voltage (B+) is supplied to the underhood fuse block C/LTR fuse and AUX PWR fuse. Battery positive voltage (B+) is supplied through the C/LTR fuse to the cigar lighter and to the AUX PWR fuse to the accessory power receptacle. Both the IP cigar lighter and the accessory power receptacle receives ground from G201. The console cigar lighter receives ground from G402.

Either fuse 22 or 23 of the underhood fuse block, the C/LTR and the AUX PWR fuses, can be moved horizontally one position in order to enable operation of the cigar lighter or accessory power receptacle while the ignition is off. The cigar lighter can be powered at all times by simply taking fuse 23 and moving it one terminal to the left, so that there is only open terminal between fuse 22 and 23. The accessory power receptacle fuse can also be powered at all times by taking fuse 22 and moving it one terminal to the right.

Battery positive voltage (B+) is supplied to the underhood fuse block C/LTR fuse and the AUX PWR fuse. Battery positive voltage (B+) is supplied through the C/LTR fuse to the cigar lighter and through the AUX PWR fuse to the accessory power receptacle. Both the cigar lighter and the console accessory power receptacle receive ground through G201. The overhead console accessory power receptacle receives ground through G402.