GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Bonneville 🢒 Body and Accessories 🢒 Interior Trim 🢒 Front Floor Panel Carpet Replacement

Removal Procedure

    Caution: When you are performing service on or near the SIR components or the SIR wiring, you must disable the SIR system. Refer to Disabling the SIR System. Failure to follow the correct procedure could cause air bag deployment, personal injury, or unnecessary SIR system repairs.

  1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
  2. Remove the front seats. Refer to Front Seat Replacement - Bucket in Seats.
  3. Remove the front floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
  4. Remove the carpet retainers. Refer to Carpet Retainer Replacement .

    5. Object Number: 430295 Size: SH
  5. Remove the front carpet (1).

Installation Procedure

    Object Number: 430295 Size: SH

    Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

  1. Lay the front carpet (1) into the vehicle.
  2. Work the front edges of the carpet into place under the instrument panel.
  3. Install the floor vent into the floor ducts, if equipped.
  4. Install the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
  5. Install the carpet retainer. Refer to Carpet Retainer Replacement .
  6. Install the front seats. Refer to Front Seat Replacement - Bucket in Seats.
  7. Enable the SIR system. Refer to Enabling the SIR System in SIR.