Removal Procedure
- Open the instrument panel
(IP) storage compartment door.
- Remove the IP storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
in Instrument Panel, Gages
and Console.
- Disconnect the electrical connector (2).
- Remove the switch (1) by depressing the locking tabs in
order to push the switch out of the IP compartment.
Installation Procedure
- Install the instrument panel (IP) storage compartment with the
electrical connector (2) exposed through the switch opening. Refer
to
Instrument Panel Storage Compartment Replacement
in Instrument Panel, Gages and Console.
- Connect the electrical
connector (2) to the switch (1).
- Install the rear compartment release switch (1) by pressing
into the IP storage compartment opening until firmly seated.
- Close the IP storage compartment door.