GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Bonneville 🢒 Body and Accessories 🢒 Seats 🢒 Driver or Passenger Seat Heater Switch Replacement

Removal Procedure
  1. Remove the console trim plate. Refer to Console Trim Plate Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 716725 Size: SH
  2. Disconnect the heated seat switch electrical connector.
  3. Remove the fastener (4).
  4. Remove the heated seat switch (1).

Installation Procedure

    Object Number: 716725 Size: SH
  1. Install the heated seat switch (1) into the center console trim plate.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the fastener (4).

    3. Tighten
    Tighten fastener to 2 N·m (18 lb in).

  3. Connect the electrical connector.
  4. Install the console trim plate. Refer to Console Trim Plate Replacement in Instrument Panel, Gages and Console.