| Table 1: | Dash Integration Module (DIM) |
| Table 2: | Drivers Door Module (DDM) |
| Table 3: | Instrument Panel Cluster (IPC) |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Daytime Running Lamps | After selecting module, select Special Functions and then select Output Controls | The DIM actuates the daytime running lamps for 5 seconds. The daytime running lamps should illuminate for 5 seconds. |
Horn Relay | After selecting module, select Special Functions and then select Output Controls | The DIM actuates the horn relay for 5 seconds. The horn should sound for 5 seconds. |
Park Lamp Relay | After selecting module, select Special Functions and then select Output Controls | The DIM actuates the Park Lamp Relay for 5 seconds. The park lamps should illuminate for 5 seconds. |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Driver Lock | After selecting module, select Special Functions, Output Controls and then select Door Lock test | The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made. |
Passenger Lock | After selecting module, select Special Functions, Output Controls and then select Door Lock test | The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made. |
Left Rear Lock | After selecting module, select Special Functions, Output Controls and then select Door Lock test | The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made. |
Right Rear Lock | After selecting module, select Special Functions, Output Controls and then select Door Lock test | The DDM momentarily pulses the door lock actuator when LOCK or UNLOCK is selected. The door should LOCK or UNLOCK when the corresponding selection is made. |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | ||
Display(s) Test | After selecting module, select Special Functions and then select Output Controls | The IPC can be activated when you select ON or OFF. When selecting ON the back lighting will illuminate, the gauges will sweep one time and the indicators will illuminate for 5 seconds. When selecting OFF the IPC will turn OFF all functions. |
