| Table 1: | DIM |
| Table 2: | RIM |
Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
Control Power | -- | The DIM commands ON the control power for 5 seconds, when you select ON. |
Daytime Running Lamps | -- | The DIM commands ON the daytime running lamp (DRL) relay for 5 seconds, when you select ON. |
Front Fog Lamps | -- | The DIM commands ON the front fog lamp relay, when you select ON. Selected status of lamps will remain until the key is cycled or a new command is received. |
High Beam Relay | -- | The DIM commands ON the high beam relay for 5 seconds, when you select ON. The OFF command will not effect the relay if headlamps are on. |
Horn Relay | -- | The DIM commands ON the horn relay for 5 seconds, when you select ON. |
Incandescent Dimming | -- | The DIM commands ON or OFF the incandescent lamps. Either 0% dim OFF or 100% dim ON. |
Low Beam Relay | -- | The DIM commands ON the low beam relay, when you select ON. The OFF command will not effect the relay if headlamps are on. |
Parking Lamps Relay | -- | The DIM commands ON the park lamp relay for 5 seconds, when you select ON. The OFF command will not effect the relay if headlamps are on. |
Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
ALC Compressor Relay | -- | The RIM activates, first the exhaust solenoid and then the compressor for 5 seconds. This prevents excessive residual over-pressure in the ALC system upon compressor engagement. |
ALC Exhaust Solenoid | -- | The RIM activates the exhaust solenoid for 5 seconds. The rear suspension should vent slightly. |
Brake To Shift Relay | -- | The RIM commands the brake to shift relay ON for 5 seconds, when you select ON. |
Cigar Lighter | -- | The RIM commands ON the cigar lighter relay for 5 seconds, when you select ON. |
Courtesy Lamp #1, #2 w/dim | -- | The RIM commands ON the courtesy lamps, when you select ON. The OFF command uses the theater dim feature. |
Courtesy Lamp #1, #2 wo/dim | -- | The RIM commands ON the courtesy lamps, when you select ON. The OFF command uses the instant off feature. |
Fuel Door Lock Relay | -- | The RIM actuates the fuel door lock relay when you select ON. The fuel door lock relay should actuate. |
Fuel Door Unlock Relay | -- | The RIM actuates the fuel door unlock relay when you select ON. The fuel door should open. |
Heated Seat Inhibit | -- | The RIM signals the heated seat module to disable the heated seat on function when you select ON. The heated seat module should disable the heated seat on function. |
Heated Seats Load Shed 1 | -- | The RIM will cycle the heated seats when you select ON. |
Heated Seats Load Shed 2 | -- | The RIM will inhibit the heated seats when you select ON. |
Inadvertent Power Relay | -- | The RIM commands ON the inadvertent power relay, when you select ON. |
RAP Relay | -- | The RIM commands the RAP relay ON for 5 seconds. The RAP relay should activate. |
Rear Defog Load Shed 1 | -- | The RIM will activate the rear defog load shed 1 for 5 seconds, when you select ON. The RIM will cycle the rear defog relay. |
Rear Defog Load Shed 2 | -- | The RIM will activate the rear defog load shed 2 for 5 seconds, when you select ON. The RIM will inhibit the operation of the rear defog relay. |
Rear Defog Relay | -- | The RIM actuates the RR DEFOG relay for 5 seconds after you select ON. The rear defog relay should be active for 5 seconds. |
Reverse Lamp Relay | -- | The RIM commands the ON the reverse lamp relay, when you select ON. The reverse lamp relay should actuate. |
Trunk Release Relay | -- | The RIM pulses the rear compartment lid release relay when select ON. The rear compartment should open. |
