GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Bonneville 🢒 Body and Accessories 🢒 Entertainment 🢒 Radio Rear Side Door Speaker Replacement

Removal Procedure

    Object Number: 334823 Size: SH
  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
  2. Note the location of the speaker electrical connector.
  3. Disconnect the electrical connector from the speaker.
  4. Remove the speaker fasteners.
  5. Remove the speaker.

Installation Procedure

    Object Number: 528086 Size: SH
  1. Locate the rear speaker to the rear door inner panel with the electrical connector located as noted during removal.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the speaker fasteners (1).

    3. Tighten
    Tighten the speaker fasteners to 1.8 N·m (16 lb in).

  3. Connect the electrical connector.
  4. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.