GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1998 🢒 Bonneville 🢒 Body and Accessories 🢒 Seats 🢒 Front Seat Adjuster Replacement

Removal Procedure

    Object Number: 314052 Size: MH
  1. Remove the front seat. Refer to Seat Replacement .
  2. Place the seat upside down on a clean protected surface.

    3. Object Number: 500962 Size: SH
  3. Remove the adjuster to seat cushion frame bolts (2).
  4. Remove the adjuster assembly (4).

Installation Procedure

    Object Number: 500962 Size: SH
  1. Install the seat adjuster assembly (4) to the seat cushion frame.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the seat adjuster bolts (2).

    3. Tighten
    Tighten the bolts to 24 N·m (17 lb ft).


    Object Number: 314052 Size: MH
  3. Install the front seat. Refer to Seat Replacement .