SERVICE MANUAL UPDATE SEC. 9F-MISC. ACCESSORIES

Models Affected: 1990 BONNEVILLE

Keyless entry module R&I should be added to Section 9F.

The following illustration shows the removal and installation procedure for the keyless entry module. The module is located on the upper right side of the instrument panel. Remove the instrument panel compartment for access.

Following replacement of module or either transmitter, the programming procedure on page 8A-132-13 should be performed. The correct wire colors to the program connector are; Terminal A-TAN, Terminal B-Black.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.