LOCKING WIRE WHEEL COVER 14 IN. WHEELS

THIS IS A REVISION OF BULLETIN 82-I-90 PUBLISHED IN THE MARCH BOOKLET, PAGES 1 AND 2.

THIS BULLETIN WILL SUPPLEMENT THE INFORMATION GIVEN TO YOU IN BULLETINS 81-I-6 AND 81-I-6A.

IN 1982, THE LOCK KEY WRENCH AND LOCK NUTS WERE CHANGED TO A NEW DESIGN FOR THE 14" WHEEL. THE LOCK NUT IS COLOR CODED ON THE END OF THE NUT. THE LOCK KEY HANDLE IS ALSO COLOR CODED. THE PART NUMBERS FOR THE NEW LOCK NUTS AND KEYS ARE AS FOLLOWS:

COLOR LOCK KEY LOCK NUT CODE PART NUMBER PART NUMBER

RED 10026487 10026493 GOLD 10026488 10026494 BLUE 10026489 10026495 GREEN 10026490 10026496 BLACK 10026491 10026497 SILVER 10026492 10026498

YOU MAY OBTAIN A LOCK KEY, A SINGLE NUT AND/OR AN I.D. REGISTRATION CARD BY ORDERING DIRECT FROM THE SUPPLIER.

ITT THOMPSON METALS DIVISION P.0. BOX 119 MADISON, FLORIDA 32340

THE COLOR OF THE WRITING ON THE REGISTRATION CARD IS THE SAME AS THE COLOR CODE ON THE LOCK NUTS AND LOCK KEY.

INDIVIDUAL LOCK KEYS ARE AVAILABLE THROUGH WDDGM.

PLEASE REFER TO BULLETINS 81-I-6 AND 81-I-6A FOR ORDERING PROCEDURE FOR LOCK KEY, I.D./REGISTRATION CARD AND OTHER WHEEL COVER RELATED PARTS FOR 13" AND 15" WHEELS SUPPLIED BY NORRIS INDUSTRIES. INDIVIDUAL LOCK BOLTS CAN BE PURCHASED FROM EITHER WDDGM OR NORRIS INDUSTRIES.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.