GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2004 🢒 Aztek - FWD 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T65-E 🢒 Transmission Vent Replacement

Removal Procedure
  1. Remove the air inlet duct. Refer to the appropriate service information.
    2. • Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.4L.
    • Refer to Air Cleaner Inlet Duct Replacement in Engine Controls - 3.6L (LY7).
  2. Use a hammer and a chisel in order to raise the transaxle vent seat off of the transaxle (37).

    3. Object Number: 164785 Size: SH
  3. Use a flat-bladed tool in order to pry the transaxle vent out of the transaxle (37).

Installation Procedure

    Object Number: 164785 Size: SH
  1. Use a small hammer and a flat-bladed tool and tap down on the transaxle vent seat in order to install the transaxle vent (37).
  2. Install the air inlet duct. Refer to the appropriate service information.
    3. • Refer to Air Cleaner Assembly Replacement in Engine Controls - 3.4L.
    • Refer to Air Cleaner Inlet Duct Replacement in Engine Controls - 3.6L (LY7).