Liftgate Latch Striker Replacement Aztek

1. Open the liftgate.
2. Remove the lower liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
3. Remove the bolts from the liftgate strikers.



4. Remove the liftgate strikers from the liftgate.

1. Install the liftgate strikers to the liftgate.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




2. Install the bolts to the liftgate strikers.

Tighten
Tighten the liftgate striker bolts to 10 N·m (89 lb in)

3. Install the lower liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
4. Close the liftgate.