Rear Seat Adjuster Replacement Bucket

1. Remove the rear bucket seat. Refer to Rear Bucket Seat Replacement .
2. Remove the rear bucket seat release handle.
3. Remove the rear seat belt buckle. Refer to Rear Seat Belt Buckle Replacement in Seats Belts.



4. Remove the bolts from the rear seat adjuster.



5. Remove the rear seat adjuster from the rear seat cushion frame.

1. Install the rear seat adjuster to the rear seat cushion frame.



2. Install the rear seat back recliner cable to the recessed space on the right and left sides of the rear seat cushion frame.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the bolts to the rear seat adjuster.

Tighten
Tighten the rear adjuster bolts to 10 N·m (89 lb in).

4. Install the rear seat belt buckle. Refer to Rear Seat Belt Buckle Replacement in Seats Belts.
5. Install the rear bucket seat release handle.
6. Install the rear bucket seat. Refer to Rear Bucket Seat Replacement .

Rear Seat Adjuster Replacement Split Bench

1. Remove the rear split bench seat. Refer to Rear 50-50 Split Seat Replacement .
2. Remove the rear split bench seat release handle and bezel.



3. Remove the bolts from the rear seat adjuster.



4. Remove the rear seat adjuster from the rear seat cushion frame.

1. Install the rear seat adjuster to the rear seat cushion frame.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the bolts to the rear seat adjuster.

Tighten
Tighten the rear adjuster bolts to 10 N·m (89 lb in).

3. Install the rear split bench seat release handle and bezel.
4. Install the rear split bench seat. Refer to Rear 50-50 Split Seat Replacement .