For 1990-2009 cars only
Removal Procedure
- Remove the front bucket seat. Refer to Bucket Seat Replacement .
- Remove the inner cushion trim cover. Refer to Seat Cushion Inner Trim Panel Replacement .
- Remove the outer cushion trim cover. Refer to Front Seat Cushion Outer Trim Panel Replacement .
- Remove the front seat belt buckle. Refer to the following procedures in Seat Belts:
- Disconnect the electrical connectors from the front seat adjuster motors.
- Remove the bolts from the seat adjuster.
- Remove the adjuster from the seat cushion frame.
- Remove the handle from the seat adjuster.
Installation Procedure
- Install the front seat adjuster to the seat cushion frame.
- Install the seat back recliner cable to the recessed space on the right and on the left sides of the seat cushion frame.
- Install the bolts to the front seat adjuster.
- Install the handle to the front seat adjuster.
- Connect the electrical connectors to the front seat adjuster motors.
- Install the front seat belt buckle. Refer to the following procedures in Seat Belts:
- Install the inner cushion trim cover. Refer to Seat Cushion Inner Trim Panel Replacement .
- Install the outer cushion trim cover. Refer to Front Seat Cushion Outer Trim Panel Replacement .
- Install the bucket seat. Refer to Bucket Seat Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the bolts to 43 N·m (32 lb ft).
