Power Mirror System Components
The power mirror system consists of the following components:
| • | Outside rearview mirror switch |
| • | Mirror selector switch |
| • | Left outside rearview mirror |
| • | Right outside rearview mirror |
| • | PWR MIRROR Fuse 10A |
Each of the outside power mirrors contains two motors. The vertical motor operates the up and down directions and the horizontal motor operates the left and right directions. Each of the power mirror motors are circuit breaker protected.
Power Mirror System Controls
The outside rearview mirror switch is a four position directional switch (Up, Down, Left and Right).
The mirror select switch is a three position switch (L, Off and R).
Power Mirror System Operation
The outside rearview mirror switch receives power through the battery positive voltage circuit from the PWR MIRROR 10A Fuse. The power mirror switch also receives a constant ground.
The four positions of the direction switch have dual switch contacts. Each of the contacts are connected to opposing sides of the appropriate power mirror motors through the selector switch. The selector switch completes these circuits depending on the position of the selector switch (L or R).
If the selector switch is placed in the L position and the up switch is depressed, battery positive voltage will be supplied to the left outside rearview mirror vertical motor through the left mirror motor up control circuit and ground through the left mirror motor left control circuit. If the down switch is depressed, battery positive voltage will be supplied to the left outside rearview mirror vertical motor through the left mirror motor left control circuit and ground through the left mirror motor up control circuit.
The remainder of the mirror functions operate in the same manner as described above. Placing the power mirror switch in opposing positions (left/right or up/down) will reverse the polarity to the mirror motor.
