Instrument Panel Compartment Door Latch Release Handle Replacement Aztek

1. Open the instrument panel (I/P) compartment door assembly.
2. Remove the screws retaining the I/P compartment door latch to the door.
3. Remove the door handle.

1. Install the door handle into position in the I/P compartment door.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the I/P compartment door latch retaining screws.

Tighten
Tighten the IP compartment door latch retaining screws to 2 N·m (18 lb in).

3. Close the I/P compartment door assembly.