Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
Schematic Reference: Wiper/Washer Schematics | |||||||||
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | |||||||
2 |
Do the windshield wipers operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 | ||||||
3 | Disconnect the windshield wiper/washer switch connector. Do the windshield wipers stop? | Go to Step 5 | Go to Step 4 | ||||||
4 | Test the following circuits for a short to voltage:
Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 9 | Go to Step 6 | ||||||
5 | Inspect for a poor connection at the windshield wiper/washer switch connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 9 | Go to Step 7 | ||||||
6 | Inspect for a poor connection at the windshield wiper motor connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 9 | Go to Step 8 | ||||||
7 | Replace the windshield wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | Go to Step 9 | -- | ||||||
8 | Replace the windshield wiper motor cover. Refer to Wiper Motor Cover Replacement . Did you complete the replacement? | Go to Step 9 | -- | ||||||
9 | Operate the windshield wiper/washer system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 | ||||||
