GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Aztek - FWD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Rear License Plate Lamp Replacement

Removal Procedure
  1. Remove the license plate.

    2. Object Number: 621210 Size: SH
  2. Remove the screws from the license plate lamp.

    3. Object Number: 621211 Size: SH
  3. Remove the license plate lamp from the end gate.
  4. Remove the license plate lamp socket, turning counterclockwise.
  5. Remove the bulb from the license plate lamp socket.

Installation Procedure

    Object Number: 621211 Size: SH
  1. Install the bulb to the license plate lamp socket.
  2. Install the license plate lamp socket, turning clockwise.
  3. Install the license plate lamp to the end gate.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 621210 Size: SH
  4. Install the screws to the license plate lamp.

    5. Tighten
    Tighten the screws to the license plate lamp to 2 N·m (18 lb in).

  5. Install the license plate.